Top 10 Arduino Classes Online

Best arduino courses
Disclaimer: Fully supported by its users, TangoLearn earns a commission every time you make a purchase via our site. This does not influence the price you pay nor it affects our ratings, course selection methodology or partners.
Reading Time: 12 minutes

Arduino is an electronic prototyping platform. It is combination of both software and hardware (open-source) that has helped with a multitude of projects, from routine objects to the most demanding scientific tools. Over the years, an expansive community of learners, developers, and professionals has shown interest in this open-source platform.


If you are interested in it, too, you can consider enrolling in one of the best Arduino courses and acquire the necessary information on the subject. To help you make a pick, our team of research experts scouted the internet and handpicked the top 10 best courses for Arduino.


They based their selection on four parameters:

  1. The background and academic skills of the expert offering the course.
  2. The course fee
  3. The knowledge you receive from the course
  4. Certification availability


Now, let us get started and list them one by one.


Top 10 Best Arduino Online Courses

  1. Arduino Step by Step: Getting Started – [Udemy]
  2. Arduino Programming and Hardware Fundamentals with Hackster – [Udemy]
  3. Learn to Design Your Own Boards – [Udemy]
  4. Basic electronics for Arduino Makers – [Udemy]
  5. The Arduino Platform and C Programming – Offered by University of California, Irvine – [Coursera]
  6. Online Arduino Classes – [Skillshare]
  7. Arduino Certification – [Arduino]
  8. Arduino Programming, from novice to ninja – Offered by Institut Mines-Télécom (IMT) – [edX]
  9. Arduino – [LinkedIn Learning]
  10. Arduino Courses – [Alison]


10 Best Arduino Classes Online

1. Arduino Step by Step: Getting Started – [Udemy]

Arduino Step by Step: Getting Started

Rating 4.7
Enrolled 33,619 students
Duration 16.5 hours of on-demand video
Instructor Dr. Peter Dalmaris
Paid Yes
Certification Yes
Return or refund policy 30-Day Money-Back Guarantee
Cons Unfortunately, in this Arduino programming course, the instructor stops explaining the codes after a few sessions but continues to explain things far less important. It makes things complicated for beginner-learners.


At number one is this bestselling Arduino online course with certificate. Once you finish this course, you will learn about Arduino Uno.


Learning Outcomes

It is one of the best online courses for Arduino and has a lot to learn. Why is this a part of our best Arduino courses recommendation – lets find out!

  • Building simple circuits around the Arduino Uno for implementing simple functions
  • Writing straightforward Arduino sketches for making LEDs blink, getting sensor reading, writing a text on an LCD screen, and reading the potentiometer’s position, amongst other things.
  • Learning what is Arduino and prototyping
  • Understanding analog and digital outputs and inputs
  • Learning ways in which Arduino can communicate with other devices
  • How to read datasheets
  • Using a multimeter for measuring continuity, resistance, current, and voltage
  • Employing protoboards for creating permanent projects
  • Getting productive at the Arduino IDE
  • Using arrays in your Arduino sketches
  • Compiling, writing, and uploading sketches
  • Using libraries on your own
  • Installing the libraries
  • Playing music
  • Learning what is Arduino programming
  • Familiarity with Arduino structures, keywords, and concepts
  • Measuring and detecting ultraviolet light and color
  • Assessing the acceleration, humidity, and temperature
  • Detecting noise and person entering the room
  • Creating the gadgets you want on your own
  • Finding the distance between the sensor and the object in front of it
  • Producing noise
  • Displaying text on the liquid crystal display



For this Arduino programming online course, you need:

  • An Arduino Uno
  • A computer – Mac, Windows, or Linux
  • Excited to familiarize yourself with electronics
  • Resistors, LEDs, and sensors
  • Jumper wires, wire cutter, a multimeter, mini breadboard, a soldering iron, and solder


Who should take this Arduino online course?

It is one of the best Arduino courses for:

  • Students over ten years of age (those younger would need adult supervision, especially when using a soldering iron)
  • Students with little to no prior programming or electronics experience


Review JP J.

Long time applications programmer trying to get into embedded programming. This course is exactly what I needed to get started.



2. Arduino Programming and Hardware Fundamentals with Hackster – [Udemy]

Arduino Programming and Hardware Fundamentals with Hackster

Rating 4.7
Enrolled 17,670 students
Duration 7 hours of on-demand video
Instructor Shawn Hymel and ~ ~
Paid Yes
Is this an Arduino online course with certificate? Yes
Return or refund policy 30-Day Money-Back Guarantee
Cons If you’re looking for the best online courses for Arduino with slow place, this isn’t the one.


Created in collaboration with Hackster, it is the detailed best Arduino programming course. When you enroll in this Arduino programming full course, every lecture provides you with one building block of knowledge.


You will find hands-on exercises after every session, wherein you combine the learnings of the past few lessons and the current one and assess your understanding. It is a course where you can also find solutions to review your answers.


Further, every section has a project to challenge you to synthesize the different concepts covered. Once you finish this one of the best Arduino courses, you will have the knowledge and skill to create fun projects with Arduino.


Learning Outcomes

In this Arduino online course with certificate, you will learn the following:

  • Arduino programming with C/C++ basics
  • How to build the functioning circuits on a breadboard
  • Designing circuits that spin motors and flashlights
  • Writing codes for your project
  • Sensing the environment
  • Making noise
  • Creating a robot
  • Building programs that require basic math, light up LEDs, and control motors
  • Controlling the Internet of Things (IoT), sensors, and devices with Arduino
  • Creating programs that perform



It is one of the best Arduino courses. For this Arduino programming course, you need:

  • Ability to use a computer
  • Arduino
  • Supporting electronics listed in lecture 5
  • Knowledge of algebra


Beyond this, you need no added hardware for the course.


Who should take these Arduino classes online?

This Arduino online course with certificate can benefit:

  • Tinkerers, hobbyists, and makers who build everything from animatronic sculptures to interactive wearables
  • Entrepreneurs and professional engineers wishing to prototype their hardware product
  • Beginners with no experience with electronics
  • Newbies with no prior programming knowledge
  • Anyone curious about programming and electronics


Review Colin T.

Interesting and good clear presentation both audio and visual, pointing out tinkercad, tried it earlier absolutely fantastic.



3. Learn to Design Your Own Boards – [Udemy]

Learn to Design Your Own Boards

Rating 4.5
Enrolled 10,545 students
Duration 14.5 hours of on-demand video
Instructor Robert Feranec
Paid Yes
Certification Yes
Return or refund policy 30-Day Money-Back Guarantee
Cons The instructor’s accent is challenging to comprehend.


Next on our list of best Arduino courses is this bestselling Arduino programming full course. Knowledge of basic board design is vital for anyone who wishes to work in electronics or wants to design electronic products or boards. Learning it in the right software opens up the door for several companies. It helps create advanced and complex boards and get a well-paying job.


Learning Outcomes

As part of this Arduino programming online course, you will learn the following:

  • Designing your Arduino-like board
  • Learning essentials of using Altium designing
  • Creating your schematic – vital tips for circuits and component selection
  • Drawing schematic symbols and footprints
  • Generating the necessary documentation to manufacture the PCB
  • Performing a layout and routing your PCB
  • Placing components into the PCB
  • Routing PCB
  • Vital tips about layout
  • Building a 3D model of the board
  • Creating a bill of material
  • Designing board variants with different components
  • Generating Pick and Place, Gerbers, Drill files, and other files required for manufacturing
  • Building assembly drawing depicting component position on the board
  • Bringing the board to life
  • Preparing professional documents needed to manufacture the PCB
  • Assembling the board
  • Running an LED blinky example



For this Arduino online course with certificate, you need:


  • Altium Designer software


College or university students can avail the Altium student license. Several countries provide this license-free.


Who should take this course?

It is one of the best Arduino courses for:

  • University or college students
  • Junio or senior hardware design engineers
  • Hobbyists and beginner learners


Review Alberto Ramos G.

Robert is an awesome teacher that takes special effort in the details. A very good guided course teached by a better proffesional really makes the difference!



4. Basic electronics for Arduino Makers – [Udemy]

Basic electronics for Arduino Makers

Rating 4.8
Enrolled 12,740 students
Duration 7.5 hours of on-demand video
Instructor Dr. Peter Dalmaris
Paid Yes
Certification Yes
Return or refund policy 30-Day Money-Back Guarantee
Cons It may seem too elementary for most learners.


Are you a specialized Arduino maker capable of making things by following a how-to guide? Are you confident modifying or writing sketches yet not so sure about things like computing voltage drops, transistor currents, or employing a capacitor as a filter? If yes, you are not alone.


Even though Raspberry Pi and Arduino are top-class platforms suitable for tinkering with electronics, you will be unable to truly enjoy their power till you fully comprehend the basic electronics. It is the whole objective of this Arduino programming online course.


It is one of the best Arduino courses to help you understand the fundamental electronics components and principles commonly employed on platforms like Raspberry Pi and Arduino. It is also one of the highest-rated Arduino programming full courses.


Once you finish this  online course for Arduino, you will have acquired an understanding of commonly employed components in Arduino projects. In addition, the class will also help you perform relevant calculations and measurements to select apt components for the projects.


Learning Outcomes

In this Arduino online course with certificate, there is a lot to learn and grasp:

  • Understanding concepts related to current, resistance, and voltage
  • Employing Kirchhoff’s Laws for computing current and voltage
  • Learning the meaning of and calculating power and energy
  • Using resistors and different configurations like voltage ladders and voltage dividers
  • Using pull-down and pull-up resistors
  • Reading the value of a resistor from the package
  • Understanding the capacitors’ usage
  • Using Ohm’s law for calculating resistance, current, and voltage
  • Using capacitors for filters and as energy stores
  • Computing the RC time constant of the capacitor
  • Understanding diodes
  • Measuring the diode’s voltage drop
  • Guarding the circuit against the reverse polarity
  • Learning to use Zener diodes and rectifiers
  • Computing the base resistor and currents for a bipolar transistor
  • Employing the correct voltage regulator for any circuit
  • Understanding the right way of using a transistor for controlling high and low power loads
  • Using the suitable voltage regulator for the circuits



For this Arduino online course, you need:

  • Small circuits monitored by an Arduino
  • Fundamental clarity on electronics and electricity
  • Basic algebra
  • A multimeter
  • Jumper wires
  • Breadboard
  • Battery
  • Assorted capacitors, resistors, transistors, LEDs, voltage regulators, and diodes


Who should take this course?

This is one of the best Arduino courses for:

  • Anyone with little experience in using Arduino
  • People with minimal experience in using any prototyping platform
  • People who wish to brush up their knowledge of basic electronics


Review Antonio R.

Very very clear and informative.The teacher explains things in a very understandable way and in detail.Very well done lecture to move first steps in electronics!



5. The Arduino Platform and C Programming – Offered by University of California, Irvine – [Coursera]

The Arduino Platform and C Programming – Offered by University of California, Irvine

Rating 4.7
Enrolled 169,939 students
Duration Approx. 13 hours to complete
Paid Yes
Does this Arduino online course award a certificate? Yes
Instructor Ian Harris
Return policy 14-day from date of purchase
Cons Unfortunately, in this Arduino programming course, there are no discussion forums. In addition, there are very few examples.


Next, we have Coursera’s best online course for Arduino. It is Course 2 in the six-part Arduino programming full course – An Introduction to Programming the Internet of Things (IoT) Specialization.


If you wish to know everything there is to learn about Arduino, you can enroll in all of the six-course Arduino classes online. They are all 100% online, self-paced, flexible.


Learning Outcomes

In this Arduino programming online course, you can learn various things. Some of them are:

  • Outline the composition of the Arduino development board
  • Learning to program the board’s firmware
  • Install Arduino IDE 5
  • Undertaking the Arduino build process
  • Knowledge of the core working of the Arduino platform in terms of the IDE, libraries, and physical board
  • Shields are smaller boards that plug into the principal Arduino board to perform other vital functions like GPS tracking, sensing, heat, light, or offer a user interface display.
  • Invoking functions in the classes
  • Listing the implications of global variables
  • Using loops and conditionals
  • Knowing how the UART Serial communication protocol works
  • Naming C Variables and Types
  • Reading board schematics
  • Debug embedded software
  • Accessing Arduino pins
  • Programming Arduino with C code
  • Assessing the different pins on the board with the software for controlling external devices
  • Understanding the role of libraries in the employment of shields
  • Compiling and running a programming
  • Christening common C operators
  • Learning the vitality of observability and controllability in the debugging process
  • Elucidating functions, their definition, and invocation
  • Describing the role of the tools behind the IDE
  • Explaining the structure of an Arduino sketch
  • Pointing out the difference between analog and digital pins
  • Clarity on prevalent debugging architectures for embedded systems
  • Unfolding how the Arduino Serial library performs serial communication


Review VR.

Great ! Like in a real lecture. Anyone can learn from this course without a problem. like real lecture this has pop up question middle of the video and readings too. Nice



6. Online Arduino Classes – [Skillshare]

Online Arduino Classes

Skillshare is home to some of the best Arduino courses, and they have an Arduino online course for all skill levels, experiences, and talents.


These Arduino programming online courses are all taught by best industry experts. So, enrolling in these Arduino classes online shall not disappoint students.


Unfortunately, you do not receive a certification with the Skillshare Arduino programming courses. But, the quality of education is top-notch. Hence, you will not be disappointed learning with one of the Skillshare’s best online courses for Arduino.


On Skillshare, you can find free and paid courses for Arduino. There are some instructor-led Arduino programming full courses, while others are relaxed, self-paced courses.


Depending upon your preferences, you can make your selection and pick the best Arduino online course. So, go ahead, browse through the website, and choose your desired class.


From the several Arduino programming online courses, a few that particularly caught our eye include:



7. Arduino Certification – [Arduino]

Arduino Certification

Do you already possess knowledge on Arduino but wish to assess your learning? If yes, this is the right pick for you. Often studying from the software provider is considered the best method to acquire information about that tool. So, if that is your chosen medium of learning, pick this Arduino programming full course exam.


Once you have gathered sound knowledge of Arduino through the best Arduino courses, you can take this certification exam to see how you perform.


This is the best online course for Arduino, where you take an online exam to earn a certification on your knowledge of Arduino-related electronics, programming, and physical computing. You can take this Arduino programming course certification exam in English, Spanish, German, Chinese, Greek, Bengali, and Italian.


So, after you take Arduino classes online or offline, you clear this web-based examination, which you can take from anywhere. The exam comprises thirty-six questions, and there is a seventy-five-minute time limit to finish this Arduino online course with certificate.


As soon as you submit your paper, you will receive the results. It helps you see whether you passed or failed the exam. If you clear the test, you receive your credentials.


As this examination tests your knowledge on topics like electricity, programming syntax, electronic components, Arduino IDE, Duty and Frequency cycle, Schematics and Circuits, Programming Logic, and Arduino boards, you should look for online courses for Arduino that provide these learnings.


Alternatively, all the exam questions are based on concepts discussed in the Arduino Starter Kit, so master it and go for the exam.



8. Arduino Programming, from novice to ninja – Offered by Institut Mines-Télécom (IMT) – [edX]

Arduino Programming, from novice to ninja – Offered by Institut Mines-Télécom

Next, we have an offering from edX in our selection of best Arduino courses. It is a free Arduino online course. However, with the free  classes, you do not avail of a certification. So, if that is what you need, you will have to pay a small fee. It is an instructor-paced course. Hence, there will be a fixed time to take it.


In this course, the instructor provides recommendations on where to buy the Arduino starter kit to pick the correct hardware to set themselves up or find online simulators that work best as an alternative if you do not want to invest in the material yet.


It is one of the best four-week online courses for Arduino that demands a weekly effort of two to three hours. The course receives financial support from the Patrick and Lina Drahi Foundation.


Learning Outcomes

It is one of the best Arduino courses to learn about:

  • Programming and electronics from the basics and building up to unveil the mystery related to the Arduino platform
  • Progressing with the Arduino microcontroller
  • Using sensors for detecting external events like sound or light
  • Ideas to connect Arduino with analog and digital sensors (spotting things like light, noise, or pressure)
  • Knowing how to perform events associated with external events
  • FabLabs fundamentals, an international network of over a thousand spaces where people can access digital manufacturing machines and practice with Arduino alongside other makers
  • Using software to regulate motors, sounds, and lights


Who should take this Arduino programming online course?

This Arduino online course will benefit:

  • Students in design or electronics
  • Engineers, designers, or developers, aspiring to solidify their skills in interactive electronics
  • Beginners new to Arduino
  • Those wishing to practice their Arduino skills with concrete coding challenges



9. Arduino – [LinkedIn Learning]


LinkedIn Learning also has some of the best Arduino courses. You can find Arduino classes online for all skill-level and experiences. There are certified and non-certified, free and paid, self-paced and instructor-led courses.


Browse through Arduino programming full course offerings to pick ones that satiate you. Some top offerings are:



10. Arduino Courses – [Alison]

Arduino Courses

Alison also has some free, intuitive courses to learn about the role of Arduino in building microcontrollers for digital technology. You can check their offerings to find a suitable one.


Some of Alison’s top Arduino online courses are:


So, these are the top 10 best Arduino courses. They are all one better than the other. However, we recommend the following sessions one after the other for an intensive understanding of the topic.



Leave a Comment

Your email address will not be published. Required fields are marked *